RJ45 Modular Plug Crimper Crimping Tool

Product general information:

Commercial terms of products:

Description：
Cutting modular cabel, cutter is on teh rear side of the tool

1a: For flat cable, cut and strip alwasy in one operation

1b: For round cable, turn the tool to its rear side, so that the single bladed cutter is facing you. Insert the round cable into the upper round hole, and squeeze the handles

Stripping modular cable, stripper is on the front side of the tool

2a: Insert the flat cable into the stripper and let it extend a little past the lower cut blade. Squeeze the handles, cable must be kept perpendicular and then pull from the tool

2b: Insert the round cable into the round stripping hole on the front side, squeeze the handles, and then turn the cable in counter clockwise direction and the tool in clockwise direction at the same time

Remove the outer jacket, insert the stripper cable into the plug and be sure both side of the cable matches well

Crimping modular plug

Place the modular plug with cable into the tool's holde. Be sure the stripper wire is between the tab and gold contacts. Squeeze the  handles until it stops. Remove the crimped plug from the tool

Ratchet Released

During the crimping process, you may turn the screw on the ratchet in counter clockwise direction to stop the incorrect operation

Quick Detail:
1.Cutting Tool
2.arious modular plug


Applications:
Lan and telecom


Specifications:

Competitive Advantage:
1.More than 10 years OEM manufacturing experience

2.Implement industry 4.0 across our manufacturing process

3.100% self-design patent product for major category

4.Established more than 45 world-wide selling networks in 5 years

5.On-line and off-line marketing service